Truma Combi D4E Diesel Air and Water Heater Kit

Truma

No reviews yet Write a Review
SKU:
D4E-Black

Description

Truma Combi D4E Diesel Heating and Hot Water Kit with iNet X Control Panel

Diesel and mains powered air and water heater with a 10 litre tank

The Truma Combi D4E is a combined heater and hot water system for campervans, motorhomes and caravans that runs on diesel instead of gas. It draws fuel straight from your vehicle’s tank, so there are no gas bottles to refill or swap, and you’re never stuck looking for an LPG station in remote areas. It runs on diesel, mains hook-up, or both together. You can use it off-grid on diesel, or switch to electric on site to save fuel. It provides up to 4kW of diesel heating and up to 1800W on electric, and heats its 10 litre tank from 15°C to 60°C in around 20 minutes. Use summer mode for hot water only, or winter mode for heating and hot water together.

Key Features:

  • Runs on Vehicle Diesel: Fuels from your vehicle’s tank, so you don’t need gas bottles.
  • Up to 4kW Diesel Heating: Plenty of warmth for colder trips, on site or off-grid.
  • Up to 1800W Electric Heating: Run on campsite hook-ups to save fuel.
  • 10 Litre Water Tank: Enough hot water for showers and washing up on the road.
  • Fast Heating Performance: Heats water from 15°C to 60°C in around 20 minutes.
  • Summer and Winter Modes: Hot water only, or heating and hot water together.
  • iNet X Control with App: Manage your heating from the panel or your phone over Bluetooth.

If you’d rather not deal with gas, or you spend a lot of time off-grid, the Truma Combi D4E is a solid choice. Because it runs on the same fuel as your van, it’s one less thing to plan for, and it keeps you warm with hot water on tap all year round.

The Truma Combi D4E Kit Includes:

  •     Truma Combi D4E diesel and electric heater unit
  •     Truma iNet X digital control panel
  •     John Guest water kit
  •     6 meters control panel cable
  •     Truma Combi diesel exhaust kit
  •     Truma universal fuel take-off kit (works with most vehicle standard fuel senders)
  •     Japan Solderless Terminal electrical ends
  •     Truma installation and operation instructions


**Room Temperature Sensor Cable is not included in the kit. Additionally, ducting is NOT included with the kit and is available to be purchased separately.

Extra Information

Brand:
Truma
Energy sources:
Diesel as per EN 590
Rated heat output in diesel mode:
1000 W / 2000 W / 3000 W/ 4000 W
Rated heat output in electric mode:
900 W / 1800 W
Rated heat output in mixed mode:
max. 3800 W
Fuel consumption:
0.1 – 0.4 l/h
Power consumption (at 12 V): operation of heater and water container:
0.4 – 8.1 A
Power consumption (at 230 V):
3.9 A / 7.8 A
Water capacity:
10 litres
Heating time (from approx. 15 °C to approx. 60 °C): Water container:
approx. 20 min.
Heating time (from approx. 15 °C to approx. 60 °C): Heater and water container acc. to EN 15033:
approx. 80 min.
Power consumption (at 12 V): heating water container:
0.5 A
Air flow rate (free blowing):
max. 287 m³/h
Quiescent current:
approx. 1 mA
Quiescent current consumption CP plus (optional):
3 mA
FrostControl heating element (optional):
max. 0.4 A
Pump pressure:
max. 2.8 bar
System pressure:
max. 4.5 bar
Dimensions H (mm):
300
Dimensions W (mm):
450
Dimensions D (mm):
510
Installation dimensions (minimum dimensions–additional space must be provided for the gas connection, water connections and drain valve (L x W x H) depending on the installation situation):
540 x 500 x 350 mm
Weight:
16.8 kg